Payment & Shipping Terms:
|Vehicle Type:||Swing Arm Garbage Container Truck||Trash Bin Volume:||10m3|
|Overall Dimensions (mm):||7550,7520X2500X3300||Drive Form:||4x2|
|Total Weight (kg):||18000||Curb Weight (kg):||7420|
|Engine:||WD615.87 290hp||Tire Specifications:||12.00R20 Radial|
water sprinkler truck,
sewer suction truck
10m3 Sewage Suction Vehicle 4x2 Swing Arm Garbage Container Truck 290hp
Sinotruk Howo 4x2 Special Purpose Truck 10m3 Swing Arm Garbage Container Truck 290hp Euro II LHD&RHD
Introduction of Sinotruk Howo 4x2 10m3 Swing Arm Garbage Container Truck
Swing Arm Garbage Container Truck is widely used with urban street school garbage disposal, and is applicable to the national general garbage bucket. The truck is characterized by the separation of the bucket and the car body, which can realize the joint operation of one truck and multiple buckets, and each trash point is placed more A garbage bucket with a self-unloading function, hydraulic operation, and cyclic transportation, which fully improves the transportation capacity of the vehicle, especially suitable for short-distance transportation, such as the sanitation department's cleaning and transportation of urban garbage.
Design features of Sinotruk Howo 4x2 10m3 Swing Arm Garbage Container Truck
1. Balance valve
Sealed pressure control Safety interlock
It can ensure the synchronous movement of the two main boom cylinders, constant pressure, and balanced cylinder movements. High-pressure pipeline joint, high pressure bearing, good sealing performance, is the first choice for high-pressure pipeline connection system. The hydraulic system has a safe interlocking function. The Foton era small arm truck ensures the safety and reliability of the hydraulic system during operation.
2. Swing arm mechanism
Well-designed and excellent performance
The swing arm mechanism controls the oil cylinder by a multi-way valve, and drives the swing arm to complete the rotation at an angle of 145 ° to lift and dump the garbage in the garbage bucket.
3. Swing arm garbage bucket
Open and close freely
The swing arm garbage bucket is a garbage truck box. On both sides of the upper cover, telescopic oil cylinders are installed to control the opening and closing of the upper cover. At the same time, the lifting lever of the garbage bin and the upper cover form a linkage.
Convenient operation saves manpower
The hopper of the swing arm garbage truck is divided into two types: sealed and open. Load garbage into the hopper first, then load the chain, and then control the swing arm hopper to get on the truck. The maximum tilting angle of the hopper is generally 86 °.
5. Working status
The swing arm garbage truck operating system is powered by a gearbox and a power take-off. The swing arm mechanism controls the oil cylinder by a multi-way valve, and drives the swing arm to complete a rotation of 145 degrees to lift and dump the garbage in the garbage bucket. Telescopic oil cylinders are installed on both sides of the swing arm garbage bucket top cover to control the opening and closing of the upper cover. At the same time, the lifting lever of the trash bin and the upper cover form a linkage. The swing arm garbage truck takes one minute to complete one swing arm cycle. When the arm is swinging, the vehicle body is separated from the garbage bucket, which can realize the recycling use of one vehicle and multiple buckets, thereby effectively reducing the operation cost of municipal sanitation.
Technical specification of Sinotruk Howo 4x2 10m3 Swing Arm Garbage Container Truck
|Vehicle Type||Swing Arm Garbage Container Truck||Trash bin volume||10m3|
|Overall dimensions (mm)||7550,7520X2500X3300||Drive form||4x2|
|Number of hydraulic cylinders||4pcs||Ground support number||2pcs|
|Total weight (kg)||18000||Rated mass (kg)||10450|
|Curb weight (kg)||7420||Maximum speed (km / h)||92|
|Front axle||HR7, 7t||Rear axle||MCY13, 13t|
|Fuel type||Diesel||Emission Standards||Euro II|
|Wheelbase (mm)||4500||Tire specifications||12.00R20 Radial|
|Chassis brand||Sinotruk Howo||Engine brand / model||WD615.87|
|Power / horsepower (kW / hp)||213/290||Displacement (mL)||9726|
|Upload configuration parameters|
|Standard||The operating system of the swing arm garbage truck is composed of a power take-off, a balance valve, an oil pipe, a fuel tank, an oil pump, a manual multi-way reversing valve, a balance valve, and a one-way hydraulic lock. The system is powered by a gearbox and a power take-off. .|
|Optional||Optional rear turning mechanism, side protection adopts cold-formed channel steel / Q235-A, bolt connection. The rear protection adopts cold-formed channel steel / Q235-A, which is welded and replaced by a special device.|
Packaging & Shipping
All the truck, semi trailer and spare parts will be polished with wax before shipping, and suitable shipping way will be according to the truck type and destination port to choose.
For truck and semi trailer,There are three shipping ways can be choose, RORO, BULK CARGO VESSEL & FLAT RACK CONTAINER.
Q1. Are your manufacturer ?
A : Yes. We can totally manufacture the trucks as you required.
Q2. Do you have a good organization of shipping vessel ?
A : Yes, we have a good and long term cooperation with the world first class famous shipping company line,like MSK,PIL,SUNSHINE SHIPPING,ETC.The order over 500 units of vehicle,we will lease a vessel.
Q3. How about your warranty items?
A : We supply original spare parts of our vehicles, if you need, we will show you spare parts list for your choosing to make sure daily maintain of your vehicles.
Q4. Can I be your agent in my country?
A : It is Ok if the order is appropriate, we looks forward to long-term cooperation with you.
Q5. What is the delivery time and payment term?
A : Our common products delivery time is 10-35 working days except some definitely special vehicles. We accept 30% T/T deposit and 70% balance T/T or 100% L/C. More details, please contact with our salesman.
Contact Person: Judy Chen
Tel: 86 13791003097