Payment & Shipping Terms:
|Truck Name:||One Pull Two Car 4x2 Flatbed Road Wrecker Tow Truck||Dimensions:||5995×2300×2300(mm)|
|Total Mass:||4495(Kg)||Curb Weight:||3860(Kg)|
|Max.load:||3t||Tire Specification:||7.00R16 8PR|
sewer suction truck,
refrigerated box truck
4x2 Special Purpose Truck One Pull Two Car Flatbed Road Wrecker Tow Truck
Special Purpose Truck One Pull Two Car 4x2 Flatbed Road Wrecker Tow Truck Isuzu Engine 115hp
Equipment introduction of One Pull Two Car 4x2 Flatbed Road Wrecker Tow Truck Isuzu Engine 115hp
Chassis configuration: White / yellow cab, QL1040A6HAY, wheelbase 3360mm, Isuzu 115 horsepower, 7.00R16 steel tires, dual-circuit oil brake, five-speed transmission, with air conditioning, directional assistance, 2 tons in front axle, rear axle 4- 4.8 tons with ABS.
Body configuration: using German technology folding stamping flat plate, the flat plate is 4.2 meters long and 2.3 meters wide, with double-sided linkage operation device, equipped with 2 rear working lights, a 4 ton hydraulic winch with 21 meters wire rope, a tool box, a hand wash Box, equipped with 2 trolleys, 4 binding straps, a pair of L-shaped tire carrier, plus hydraulic telescopic auxiliary board (1.1 meters), Note: Blue card one drag and two obstacle clearance are divided into two types: tail flip and tail telescopic The tail flip board can be customized according to customer requirements. The middle extension board (0.5 meters long, the entire board length reaches 4.7 meters (excluding the tail flip 1 meter))
Features of One Pull Two Car 4x2 Flatbed Road Wrecker Tow Truck Isuzu Engine 115hp
① Folding flat back truck operation
After the power take-off is in the cab, slide the plate out of the card position through the tail control valve and lift it down. Use the wire rope to hoist the vehicle to hold the plate, control the plate to retract up, lower the plate and slide back to the card position.
② Full-floor flat-bed truck operation
It can effectively solve the consignment of road-mounted vehicles and other bottom-suspended vehicles. Equipped with electronic control and manual dual operation. The flat plate can be put down by the hook and arm combination device. After loading, the flat plate can be pulled back by the sentence arm.
③ Rear arm trailer operation
Extend and lower the rear support arm, point it at the front wheel of the vehicle being towed, adjust the width of the support arm, and then broadcast it into the L-shaped tire carrier, lock the left and right wheels, and control the lifting of the support arm to lift the front wheel of the vehicle. When the rear wheel of the towed vehicle is locked, the auxiliary wheel can be used to lift the rear wheel.
New stamping anti-slip nail plate structure: the pre-shaped welding torch process board surface is smoother, more durable
The angle between the surface of the folding flat mechanism and the ground is 8-10- (depending on the model), which is suitable for the operation requirements of the chassis height of most domestic and foreign trolleys.
① Folding flat mechanism
② Full-floor flat plate mechanism
L Multifunction Option
Y-shaped fork fork holder
3T forged steel hook
Detail specification of One Pull Two Car 4x2 Flatbed Road Wrecker Tow Truck Isuzu Engine 115hp
|One Pull Two Car 4x2 Flatbed Road Wrecker Tow Truck|
|Vehicle name:||Flatbed Road Wrecker Tow Truck||Model||SCEC5040TQZPW|
|Approach / departure angle:||24/15(°)||Front / rear suspension:||1015/1620(mm)|
|Number of axes:||2||Maximum speed:||98(km/h)|
|Fuel consumption:||(L/100Km)||Number of springs:||3/3+2|
|Number of tires:||6(pcs)||Tire specifications:||7.00R16 8PR|
|Front track:||1377(mm)||Rear track:||1425(mm)|
|1. Loading weight of wrecker truck: 505kg. 2. The side and rear protection materials are Q235, the side protection bolts are connected, the rear protection is welded, the cross-section size (mm): 100 × 50, the height from the ground is 450mm, and the rear tail station board is optional. Optional rear style. 3. ABS model / manufacturer: APG3550500A4 / Zhejiang Asia-Pacific Mechanical & Electrical Co., Ltd.|
Contact Person: Judy Chen
Tel: 86 13791003097